Fenghua Hongwei Pneumatic Hydraulic Kit Factory

MGP
CY1L
CY1R
CY1B
MXS
MHC2
MGC
MGG
STM
CX2
CDJ
MHL2
MH

Products Features:

1.With smaller, more compact design
2.Various installation ways, parallel axis type, vertical axis type and side connection type are optional

Specification

Cyilnder Diameter(mm)		12	16	20	25	32	40	50	63	80	100
Fluid		Air
Acting Mode		Double-acting
Ensered Pressure Resistance		1.5MPa(15.3kgf/cm²)
Maximum Working-pressure		1.0MPa(10.2kgf/cm²)
Minnimum Working-pressure		0.12.MPa(kgf/cm²)
Ambient and Medium Temprature		-10~+60℃
Piston Speed		50~500mm/s								50~400mm/s
Cushion		Rubber buffer
Tolerance of Stroke		+1.5 0 mm
*Lubrication		Not Required
Bearing		Slide bearing or ball guide bdaring
Precision of Piston with No Swiveling	Slide Bearing	±0.08°		±0.07°		±0.06°		±0.05°		±0.04°
	Ball Guide Bearing	±0.10°		±0.9°		±0.08°		±0.06°		±0.05°
Rc(PT)Joint Tube Caliber		M5×0.8		1/8				1/4		3/8

Products features:
1. Parallel type, anti-dust type, point type is optional
2. Fast reflection when it is clamped or loosened
3. The distance and angle for clamp can be adjusted according to the appearance of the gripper, to control the cylinder stroke through magnetic sensor switch
4. Speed adjustable equipment is within

Specification

Cyilnder Diameter(mm)		6	10	16	20	25	32	40
Fluid		Air
Acting Mode		Double action Single action：Normal open/Normal close
Maximum Working-pressure		0.7MPa
Maximum Working-pressure	Double-acting	0.15	0.2	0.1
	Single acting	0.3	0.35	0.25
Ambient and Medium Temprature		-10~60℃
Highest Working Frequency		180c·p·m·					60c·p·m·
Repeated Accuracy (mm)		±0.01					±0.02
Magnetic Ring Within Cylinder		With（Standard）
Note: 2)Lubrication		No need
Rc(PT)Joint Tube Caliber		M3×0.5		M3×0.8